DynaVap OmniVap XL Titanium

$215

(1 customer review)

The DynaVap OmniVap XL Titanium is the finest vaporizer DynaVap offers. It is made entirely of medical grade titanium, except for The Cap which is stainless steel. The extra length allows for cooler vapor and the adjustable mouthpiece allows airflow to be dialed in to suit your preference. The titanium tip ensures fast heatup and cooldown and provides better airflow compared to the non-titanium counterparts. Ships from Malaysia.

Out of stock

Out of stock

Join the waitlist to be emailed when this product becomes available

At 109mm, the OmniVap XL Titanium includes the Titanium Tip, Cap, Omni Mouthpiece and XL Condenser Assembly, and a 62mm Omni Titanium Stem. Apart from the stainless steel cap, the OmniVap XL is made entirely of titanium.

The Omni system has a specialized design to allow for simple adjustment of flow restriction, allowing complete control of the vapor and air intake ratio. Adjust by simply twisting the mouthpiece, which extends/retracts the condenser into the tip.

Instructions

    1. Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.

 

    1. The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.

 

    1. If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.

 

    1. When you are ready for the first use, let it cool down, then remove the cap from the VapCap.

 

    1. Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.

 

    1. Place the cap back on the VapCap.

 

    1. Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.

 

    1. Continue rotating and heating the cap until you hear and or feel a click – this means the VapCap is ready!

 

    1. Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.

 

    1. Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.

 

    1. When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.

 

    1. When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”

 

    1. Reload for another round of simple and wonderful vapor.

 

    • It is recommended that you use a butane torch style lighter with your VapCap.

 

    • Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.

 

    • It is VERY important to wait until you hear the cool down click before applying more heat.

 

    • Stop heating your VapCap as soon as you hear the click until you get to know each other better.

 

    • You can vary the intensity of the flavor by using the air/vapor adjustment port.

 

    • Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.

 

    • DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!

 

    • The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.

 

    • The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.

 

Features

  • Made entirely of titanium which heats and cools quicker than stainless steel. Only The Cap is made of stainless steel.
  • Titanium tip offers better airflow and faster cooldown for more sessions and less waiting.
  • Adjustable airflow by twisting the mouthpiece, allowing you to optimize the experience.
  • Only needs a lighter to vaporize (butane torch preferred), no batteries or electronics required.
  • Audible clicks indicate when the correct temperature has been reached, and when the VapCap can be touched again or stored away.
  • Pure convection heating through simple and ingenious system.
  • Made in the USA.

Included

1 x DynaVap OmniVap XL Titanium
1 x Storage Tube

DynaVap OmniVap XL Titanium was last modified: September 21st, 2023 by AsiaVape.co
Brand

Use With

Concentrates, Dry Herbs

Warranty

1 review for DynaVap OmniVap XL Titanium

  1. James

    Cool and nicer vapor than the DynaVap 2020M. This feels like it heats up faster and has better airflow. The vapor also isn’t as hot so you can take a bigger, massive draw. The design is also great and feels good in hand.

Only logged in customers who have purchased this product may leave a review.

You may also like…