DynaVap VapCap M 2019

$79

(3 customer reviews)

The DynaVap VapCap M 2019 Edition is a tiny, torch operated vaporizer that delivers incredibly potent vapor hits on demand. The VapCap M 2019 Edition is built of stainless steel and features pure convection heating capable of rivaling both bigger and more expensive vaporizers.

Out of stock

The DynaVap VapCap M 2019 Edition is a compact, durable vaporizer made of medical grade stainless steel. The VapCap M is unique in that it only requires a torch lighter to create very high quality vapor. No batteries, electronics or atomizers required.

To use the DynaVap VapCap M, fill it with herbs and place the VapCap over the herb chamber. Apply heat to the VapCap from a butane torch lighter. When the VapCap clicks, the temperature for vaporizing has been reached. For the next 20-30 seconds, you can inhale great tasting vapor that is being produced on-demand through the specially engineered herb chamber and condenser. Once the VapCap clicks again, it can be touched (gently) and also reloaded for a new session.

VapCap ‘M’ 2019 version updates:

  • New serpentine pattern air channels on the stainless steel tip with “cutting edge” design incorporated from the DynaVap titanium tip. These changes improve the airflow characteristics.
  • Ridges on the midsection offer tactile indication when fingers reach the end of the stem.
  • New beautiful grip and air port cutouts makes holding the VapCap M 2019 easier as well as locating and adjusting the airflow.
  • Rocker opposite of the air port makes opening and closing the airflow a breeze.
DynaVap VapCap M 2019 Exploded View

Instructions

    1. Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.

 

    1. The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.

 

    1. If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.

 

    1. When you are ready for the first use, let it cool down, then remove the cap from the VapCap.

 

    1. Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.

 

    1. Place the cap back on the VapCap.

 

    1. Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.

 

    1. Continue rotating and heating the cap until you hear and or feel a click – this means the VapCap is ready!

 

    1. Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.

 

    1. Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.

 

    1. When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.

 

    1. When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”

 

    1. Reload for another round of simple and wonderful vapor.

 

    • It is recommended that you use a butane torch style lighter with your VapCap.

 

    • Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.

 

    • It is VERY important to wait until you hear the cool down click before applying more heat.

 

    • Stop heating your VapCap as soon as you hear the click until you get to know each other better.

 

    • You can vary the intensity of the flavor by using the air/vapor adjustment port.

 

    • Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.

 

    • DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!

 

    • The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.

 

    • The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.

 

Video Overview

Features

  • Very durable construction of medical grade stainless steel.
  • Only needs a butane torch lighter to vaporize, no batteries or electronics required.
  • Audible clicks indicate when the correct temperature has been reached, and when the VapCap can be touched again or stored in the carrying case.
  • Pure convection heating through simple but ingenious system.
  • Made in the USA.</>

Included

1 x DynaVap VapCap M 2019 Edition
1 x Carrying Case

Brand

Use With

Dry Herbs

Select Location to Purchase From

Malaysia Warehouse (Shipping Worldwide), Bangkok Warehouse (Shipping in Thailand)

Warranty

3 reviews for DynaVap VapCap M 2019

  1. James

    I love this vape. It’s so easy to use and the “click” has been completely faultless. Cleaning is minimal and the vapor production impressed me more than some other electrical vaporizers I own. Highly recommended as a battery free alternative to bigger models, and perfect while on the go. I use it with a cheap torch lighter with great success.

  2. Rahul (verified owner)

    Great vape! It’s very rugged and reliable. The battery-less vaping technique is really amazing!

  3. Vijay (verified owner)

    They’ve delivered as they promised. 10/10 Would recommend!

Only logged in customers who have purchased this product may leave a review.

You may also like…